Booting 12.10 with EFI to a blank screen with Dell XPS 12 (Intel HD4000)
When starting without any boot parameters I just see the blank screen and hear the drums in the background. For installation I need to set i915.modeset=0 and xforcevesa as boot parameters to get a screen. After installation i915.modeset=0 is sufficient to get a screen, but with poor graphic performance (vesa). When starting to a blank screen i can ssh to the system and the Xorg.0.log looks perfectly OK, loading Intel dirver for Ivybridge with its accelerations and so on. I see no error message giving me a hint why there is a blank screen. Any ideas?
Thanks,
Michael
This is my Xorg.0.log:
michaelz@
[ 5.026]
X.Org X Server 1.13.0.901 (1.13.1 RC 1)
Release Date: 2012-11-22
[ 5.026] X Protocol Version 11, Revision 0
[ 5.026] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu
[ 5.026] Current Operating System: Linux michaelz-
[ 5.026] Kernel command line: BOOT_IMAGE=
[ 5.026] Build Date: 23 November 2012 11:04:46AM
[ 5.026] xorg-server 2:1.13.
[ 5.026] Current version of pixman: 0.26.0
[ 5.026] Before reporting problems, check http://
to make sure that you have the latest version.
[ 5.026] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.026] (==) Log file: "/var/log/
[ 5.027] (==) Using config file: "/etc/X11/
[ 5.027] (==) Using system config directory "/usr/share/
[ 5.029] (==) No Layout section. Using the first Screen section.
[ 5.029] (**) |-->Screen "Default Screen" (0)
[ 5.029] (**) | |-->Monitor "Configured Monitor"
[ 5.029] (**) | |-->Device "intel"
[ 5.029] (==) Automatically adding devices
[ 5.029] (==) Automatically enabling devices
[ 5.029] (==) Automatically adding GPU devices
[ 5.029] (WW) The directory "/usr/share/
[ 5.029] Entry deleted from font path.
[ 5.029] (WW) The directory "/usr/share/
[ 5.029] Entry deleted from font path.
[ 5.029] (WW) The directory "/usr/share/
[ 5.029] Entry deleted from font path.
[ 5.029] (WW) The directory "/usr/share/
[ 5.029] Entry deleted from font path.
[ 5.029] (WW) The directory "/usr/share/
[ 5.029] Entry deleted from font path.
[ 5.029] (WW) The directory "/var/lib/
[ 5.029] Entry deleted from font path.
[ 5.029] (==) FontPath set to:
/usr/share/
/usr/share/
built-ins
[ 5.029] (==) ModulePath set to "/usr/lib/
[ 5.029] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.029] (II) Loader magic: 0x7fd382a7dc40
[ 5.029] (II) Module ABI versions:
[ 5.029] X.Org ANSI C Emulation: 0.4
[ 5.029] X.Org Video Driver: 13.1
[ 5.029] X.Org XInput driver : 18.0
[ 5.029] X.Org Server Extension : 7.0
[ 5.029] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.030] (--) PCI:*(0:0:2:0) 8086:0166:1028:0589 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/
[ 5.030] (II) Open ACPI successful (/var/run/
[ 5.030] Initializing built-in extension Generic Event Extension
[ 5.030] Initializing built-in extension SHAPE
[ 5.030] Initializing built-in extension MIT-SHM
[ 5.030] Initializing built-in extension XInputExtension
[ 5.030] Initializing built-in extension XTEST
[ 5.030] Initializing built-in extension BIG-REQUESTS
[ 5.030] Initializing built-in extension SYNC
[ 5.030] Initializing built-in extension XKEYBOARD
[ 5.030] Initializing built-in extension XC-MISC
[ 5.030] Initializing built-in extension SECURITY
[ 5.030] Initializing built-in extension XINERAMA
[ 5.030] Initializing built-in extension XFIXES
[ 5.030] Initializing built-in extension RENDER
[ 5.030] Initializing built-in extension RANDR
[ 5.030] Initializing built-in extension COMPOSITE
[ 5.030] Initializing built-in extension DAMAGE
[ 5.030] Initializing built-in extension MIT-SCREEN-SAVER
[ 5.030] Initializing built-in extension DOUBLE-BUFFER
[ 5.030] Initializing built-in extension RECORD
[ 5.030] Initializing built-in extension DPMS
[ 5.030] Initializing built-in extension X-Resource
[ 5.030] Initializing built-in extension XVideo
[ 5.030] Initializing built-in extension XVideo-
[ 5.031] Initializing built-in extension XFree86-
[ 5.031] Initializing built-in extension XFree86-DGA
[ 5.031] Initializing built-in extension XFree86-DRI
[ 5.031] Initializing built-in extension DRI2
[ 5.031] (II) LoadModule: "glx"
[ 5.032] (II) Loading /usr/lib/
[ 5.034] (II) Module glx: vendor="X.Org Foundation"
[ 5.034] compiled for 1.13.0.901, module version = 1.0.0
[ 5.034] ABI class: X.Org Server Extension, version 7.0
[ 5.034] (==) AIGLX enabled
[ 5.034] Loading extension GLX
[ 5.034] (II) LoadModule: "intel"
[ 5.035] (II) Loading /usr/lib/
[ 5.038] (II) Module intel: vendor="X.Org Foundation"
[ 5.038] compiled for 1.13.0.901, module version = 2.20.15
[ 5.038] Module class: X.Org Video Driver
[ 5.038] ABI class: X.Org Video Driver, version 13.1
[ 5.038] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 5.039] (++) using VT number 7
[ 5.039] (II) intel(0): using device path '/dev/dri/card0'
[ 5.039] (II) intel(0): SNA compiled: xserver-
[ 5.040] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 5.040] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 5.040] (==) intel(0): RGB weight 888
[ 5.040] (==) intel(0): Default visual is TrueColor
[ 5.040] (**) intel(0): Option "AccelMethod" "sna"
[ 5.040] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 5.040] (**) intel(0): Framebuffer tiled
[ 5.040] (**) intel(0): Pixmaps tiled
[ 5.040] (**) intel(0): 3D buffers tiled
[ 5.064] (**) intel(0): Throttling enabled
[ 5.064] (**) intel(0): Delayed flush enabled
[ 5.064] (**) intel(0): "Tear free" disabled
[ 5.064] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 5.065] (II) intel(0): Output eDP1 using monitor section Configured Monitor
[ 5.065] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 5.096] (II) intel(0): Output VGA1 has no monitor section
[ 5.112] (II) intel(0): Output HDMI1 has no monitor section
[ 5.160] (II) intel(0): Output DP1 has no monitor section
[ 5.160] (II) intel(0): EDID for output eDP1
[ 5.160] (II) intel(0): Manufacturer: LGD Model: 3bd Serial#: 0
[ 5.160] (II) intel(0): Year: 2012 Week: 0
[ 5.160] (II) intel(0): EDID Version: 1.4
[ 5.160] (II) intel(0): Digital Display Input
[ 5.160] (II) intel(0): 6 bits per channel
[ 5.160] (II) intel(0): Digital interface is DisplayPort
[ 5.160] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 5.160] (II) intel(0): Gamma: 2.20
[ 5.160] (II) intel(0): No DPMS capabilities specified
[ 5.160] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 5.160] (II) intel(0): First detailed timing is preferred mode
[ 5.160] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 5.160] (II) intel(0): redX: 0.597 redY: 0.350 greenX: 0.340 greenY: 0.575
[ 5.160] (II) intel(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
[ 5.160] (II) intel(0): Manufacturer's mask: 0
[ 5.160] (II) intel(0): Supported detailed timing:
[ 5.160] (II) intel(0): clock: 138.5 MHz Image Size: 276 x 156 mm
[ 5.160] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5.160] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 5.160] (II) intel(0): Supported detailed timing:
[ 5.160] (II) intel(0): clock: 138.5 MHz Image Size: 276 x 156 mm
[ 5.160] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 5.160] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 5.160] (II) intel(0): 19CFG�125WF1
[ 5.160] (II) intel(0): Unknown vendor-specific block 0
[ 5.160] (II) intel(0): EDID (in hex):
[ 5.160] (II) intel(0): 00ffffffffffff0
[ 5.160] (II) intel(0): 00160104951c107
[ 5.160] (II) intel(0): 1f5054000000010
[ 5.160] (II) intel(0): 0101010101011a3
[ 5.160] (II) intel(0): 3500149c1000001
[ 5.160] (II) intel(0): 30203500149c100
[ 5.161] (II) intel(0): 394346478031323
[ 5.161] (II) intel(0): 00004121a401000
[ 5.161] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 5.161] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 5.161] (II) intel(0): Printing probed modes for output eDP1
[ 5.161] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 5.161] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 5.161] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 5.161] (II) intel(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 5.161] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 5.161] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 5.161] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 5.161] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 5.161] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 5.161] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 5.161] (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 5.161] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 5.161] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 5.161] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 5.161] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 5.192] (II) intel(0): EDID for output VGA1
[ 5.208] (II) intel(0): EDID for output HDMI1
[ 5.256] (II) intel(0): EDID for output DP1
[ 5.256] (II) intel(0): Output eDP1 connected
[ 5.256] (II) intel(0): Output VGA1 disconnected
[ 5.256] (II) intel(0): Output HDMI1 disconnected
[ 5.256] (II) intel(0): Output DP1 disconnected
[ 5.256] (II) intel(0): Using exact sizes for initial modes
[ 5.256] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 5.256] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.256] (==) intel(0): DPI set to (96, 96)
[ 5.256] (II) Loading sub module "dri2"
[ 5.256] (II) LoadModule: "dri2"
[ 5.256] (II) Module "dri2" already built-in
[ 5.256] (==) Depth 24 pixmap format is 32 bpp
[ 5.258] (II) intel(0): SNA initialized with IvyBridge backend
[ 5.258] (==) intel(0): Backing store disabled
[ 5.258] (==) intel(0): Silken mouse enabled
[ 5.258] (II) intel(0): HW Cursor enabled
[ 5.258] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.259] (==) intel(0): DPMS enabled
[ 5.260] (II) intel(0): [DRI2] Setup complete
[ 5.260] (II) intel(0): [DRI2] DRI driver: i965
[ 5.260] (II) intel(0): direct rendering: DRI2 Enabled
[ 5.260] (==) intel(0): hotplug detection: "enabled"
[ 5.260] (--) RandR disabled
[ 5.278] (II) AIGLX: enabled GLX_MESA_
[ 5.278] (II) AIGLX: enabled GLX_INTEL_
[ 5.278] (II) AIGLX: enabled GLX_ARB_
[ 5.278] (II) AIGLX: enabled GLX_ARB_
[ 5.278] (II) AIGLX: enabled GLX_EXT_
[ 5.278] (II) AIGLX: enabled GLX_SGI_
[ 5.278] (II) AIGLX: GLX_EXT_
[ 5.278] (II) AIGLX: Loaded and initialized i965
[ 5.278] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.279] (II) intel(0): switch to mode 1920x1080 on crtc 3 (pipe 0)
[ 5.308] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.316] (II) XKB: reuse xkmfile /var/lib/
[ 5.318] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.318] (II) LoadModule: "evdev"
[ 5.318] (II) Loading /usr/lib/
[ 5.319] (II) Module evdev: vendor="X.Org Foundation"
[ 5.319] compiled for 1.13.0, module version = 2.7.3
[ 5.319] Module class: X.Org XInput Driver
[ 5.319] ABI class: X.Org XInput driver, version 18.0
[ 5.319] (II) Using input driver 'evdev' for 'Power Button'
[ 5.319] (**) Power Button: always reports core events
[ 5.319] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 5.319] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.319] (--) evdev: Power Button: Found keys
[ 5.319] (II) evdev: Power Button: Configuring as keyboard
[ 5.319] (**) Option "config_info" "udev:/
[ 5.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.320] (**) Option "xkb_rules" "evdev"
[ 5.320] (**) Option "xkb_model" "pc105"
[ 5.320] (**) Option "xkb_layout" "de"
[ 5.321] (II) XKB: reuse xkmfile /var/lib/
[ 5.321] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 5.322] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.322] (II) Using input driver 'evdev' for 'Video Bus'
[ 5.322] (**) Video Bus: always reports core events
[ 5.322] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 5.322] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5.322] (--) evdev: Video Bus: Found keys
[ 5.322] (II) evdev: Video Bus: Configuring as keyboard
[ 5.322] (**) Option "config_info" "udev:/
[ 5.322] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 5.322] (**) Option "xkb_rules" "evdev"
[ 5.322] (**) Option "xkb_model" "pc105"
[ 5.322] (**) Option "xkb_layout" "de"
[ 5.322] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.322] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.322] (II) Using input driver 'evdev' for 'Power Button'
[ 5.322] (**) Power Button: always reports core events
[ 5.322] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.322] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.322] (--) evdev: Power Button: Found keys
[ 5.322] (II) evdev: Power Button: Configuring as keyboard
[ 5.322] (**) Option "config_info" "udev:/
[ 5.322] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 5.322] (**) Option "xkb_rules" "evdev"
[ 5.322] (**) Option "xkb_model" "pc105"
[ 5.322] (**) Option "xkb_layout" "de"
[ 5.322] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 5.322] (II) No input driver specified, ignoring this device.
[ 5.322] (II) This device may have been added with another device file.
[ 5.322] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.323] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/event5)
[ 5.323] (**) Microsoft Compact Optical Mouse 500: Applying InputClass "evdev pointer catchall"
[ 5.323] (II) Using input driver 'evdev' for 'Microsoft Compact Optical Mouse 500'
[ 5.323] (**) Microsoft Compact Optical Mouse 500: always reports core events
[ 5.323] (**) evdev: Microsoft Compact Optical Mouse 500: Device: "/dev/input/event5"
[ 5.323] (--) evdev: Microsoft Compact Optical Mouse 500: Vendor 0x45e Product 0x737
[ 5.323] (--) evdev: Microsoft Compact Optical Mouse 500: Found 3 mouse buttons
[ 5.323] (--) evdev: Microsoft Compact Optical Mouse 500: Found scroll wheel(s)
[ 5.323] (--) evdev: Microsoft Compact Optical Mouse 500: Found relative axes
[ 5.323] (--) evdev: Microsoft Compact Optical Mouse 500: Found x and y relative axes
[ 5.323] (II) evdev: Microsoft Compact Optical Mouse 500: Configuring as mouse
[ 5.323] (II) evdev: Microsoft Compact Optical Mouse 500: Adding scrollwheel support
[ 5.323] (**) evdev: Microsoft Compact Optical Mouse 500: YAxisMapping: buttons 4 and 5
[ 5.323] (**) evdev: Microsoft Compact Optical Mouse 500: EmulateWheelButton: 4, EmulateWheelIne
[ 5.323] (**) Option "config_info" "udev:/
[ 5.323] (II) XINPUT: Adding extended input device "Microsoft Compact Optical Mouse 500" (type: MOUSE, id 9)
[ 5.323] (II) evdev: Microsoft Compact Optical Mouse 500: initialized for relative axes.
[ 5.323] (**) Microsoft Compact Optical Mouse 500: (accel) keeping acceleration scheme 1
[ 5.323] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration profile 0
[ 5.323] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration factor: 2.000
[ 5.323] (**) Microsoft Compact Optical Mouse 500: (accel) acceleration threshold: 4
[ 5.323] (II) config/udev: Adding input device Microsoft Compact Optical Mouse 500 (/dev/input/mouse0)
[ 5.323] (II) No input driver specified, ignoring this device.
[ 5.323] (II) This device may have been added with another device file.
[ 5.323] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event6)
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[ 5.323] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer'
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[ 5.323] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event6"
[ 5.323] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x8409
[ 5.323] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes
[ 5.323] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes
[ 5.323] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes
[ 5.323] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen
[ 5.323] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen
[ 5.323] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5
[ 5.323] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelIne
[ 5.323] (**) Option "config_info" "udev:/
[ 5.323] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 10)
[ 5.323] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes.
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[ 5.323] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[ 5.324] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse1)
[ 5.324] (II) No input driver specified, ignoring this device.
[ 5.324] (II) This device may have been added with another device file.
[ 5.324] (II) config/udev: Adding input device Laptop_
[ 5.324] (**) Laptop_
[ 5.324] (II) Using input driver 'evdev' for 'Laptop_
[ 5.324] (**) Laptop_
[ 5.324] (**) evdev: Laptop_
[ 5.324] (--) evdev: Laptop_
[ 5.324] (--) evdev: Laptop_
[ 5.324] (II) evdev: Laptop_
[ 5.324] (**) Option "config_info" "udev:/
[ 5.324] (II) XINPUT: Adding extended input device "Laptop_
[ 5.324] (**) Option "xkb_rules" "evdev"
[ 5.324] (**) Option "xkb_model" "pc105"
[ 5.324] (**) Option "xkb_layout" "de"
[ 5.324] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/
[ 5.324] (II) No input driver specified, ignoring this device.
[ 5.324] (II) This device may have been added with another device file.
[ 5.324] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/
[ 5.324] (II) No input driver specified, ignoring this device.
[ 5.324] (II) This device may have been added with another device file.
[ 5.324] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/
[ 5.324] (II) No input driver specified, ignoring this device.
[ 5.324] (II) This device may have been added with another device file.
[ 5.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 5.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.325] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 5.325] (**) AT Translated Set 2 keyboard: always reports core events
[ 5.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 5.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 5.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 5.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 5.325] (**) Option "config_info" "udev:/
[ 5.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 5.325] (**) Option "xkb_rules" "evdev"
[ 5.325] (**) Option "xkb_model" "pc105"
[ 5.325] (**) Option "xkb_layout" "de"
[ 5.325] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 5.325] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 5.325] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event8"
[ 5.325] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 5.325] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 5.325] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 5.325] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 5.325] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 5.325] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 5.325] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 5.325] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 5.325] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelIne
[ 5.325] (**) Option "config_info" "udev:/
[ 5.325] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 13)
[ 5.325] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 5.325] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 5.325] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse2)
[ 5.325] (II) No input driver specified, ignoring this device.
[ 5.325] (II) This device may have been added with another device file.
[ 5.326] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event4)
[ 5.326] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 5.326] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 5.326] (**) Dell WMI hotkeys: always reports core events
[ 5.326] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event4"
[ 5.326] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 5.326] (--) evdev: Dell WMI hotkeys: Found keys
[ 5.326] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 5.326] (**) Option "config_info" "udev:/
[ 5.326] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 5.326] (**) Option "xkb_rules" "evdev"
[ 5.326] (**) Option "xkb_model" "pc105"
[ 5.326] (**) Option "xkb_layout" "de"
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Michael Zimmermann
- Solved:
- Last query:
- Last reply: