b43 driver blacklisted by bcmwl-kernel-source driver -> Wireless Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) not working on Gateway 6020GZ in Ubuntu 11.10

Asked by William Gamache

Upgrade to 11.10 and wireless does not work... Please help, the info I got is this... *-network:0
       description: Ethernet interface
       product: BCM4401-B0 100Base-TX
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 02
       serial: 00:e0:b8:91:d2:bf
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.70 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:11 memory:e0204000-e0205fff
  *-network:1
       description: Network controller
       product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 4
       bus info: pci@0000:02:04.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: driver=b43-pci-bridge latency=64
       resources: irq:11 memory:e0208000-e0209fff
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 11.10
Release: 11.10

Question information

Language:
English Edit question
Status:
Solved
For:
Ubuntu b43-fwcutter Edit question
Assignee:
No assignee Edit question
Solved by:
Mark Rijckenberg
Solved:
Last query:
Last reply:
Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#1

Hi,

Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1:

If you are using the Gnome interface, open the Terminal console via "Applications->Accessories->Terminal"

If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.

So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal

Step 2: Please copy-paste the following command from https://help.ubuntu.com/community/WirelessTroubleshootingProcedure in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word lsmod. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!

sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|ireless|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt5|rt6|rt7|usb|witch|wl';sudo dmidecode|egrep 'anufact|roduct|erial|elease'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|wmi|witch|wl'; cat /var/lib/NetworkManager/NetworkManager.state; sudo hwinfo --netcard ; ps -aux|egrep 'icd|etwork'; sudo lsmod

Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.

Step 4: Please also specify the exact model and make of your PC (if known) on this thread

Regards,

Mark

Revision history for this message
William Gamache (bgama12001) said :
#2

Download done.
Flash Plugin installed.
Setting up flashplugin-installer (11.0.1.152ubuntu1) ...
Setting up libhal1 (0.5.14-6) ...
Setting up libhd16 (16.0-2ubuntu1) ...
Setting up hwinfo (16.0-2ubuntu1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
  *-network:0
       description: Ethernet interface
       product: BCM4401-B0 100Base-TX
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 02
       serial: 00:e0:b8:91:d2:bf
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.70 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:11 memory:e0204000-e0205fff
  *-network:1
       description: Network controller
       product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 4
       bus info: pci@0000:02:04.0
       version: 02
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: driver=b43-pci-bridge latency=64
       resources: irq:11 memory:e0208000-e0209fff
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
02:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
02:02.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus Controller [104c:8031]
02:02.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 Host Controller [104c:8032]
02:02.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated FlashMedia Controller [104c:8033]
02:02.4 SD Host controller [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
02:04.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
H/W path Device Class Description
=========================================================
                               system Portable Computer
/0 bus Motherboard
/0/0 memory 107KiB BIOS
/0/4 processor Intel(R) Celeron(R) M processor
/0/4/8 memory 32KiB L1 cache
/0/4/9 memory 1MiB L2 cache
/0/f memory 512MiB System Memory
/0/f/0 memory 512MiB DIMM DDR Synchronous 266 MH
/0/f/1 memory DIMM DDR Synchronous 266 MHz (3.8
/0/100 bridge 82852/82855 GM/GME/PM/GMV Processo
/0/100/0.1 generic 82852/82855 GM/GME/PM/GMV Processo
/0/100/0.3 generic 82852/82855 GM/GME/PM/GMV Processo
/0/100/2 display 82852/855GM Integrated Graphics De
/0/100/2.1 display 82852/855GM Integrated Graphics De
/0/100/1d bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1d.1 bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1d.7 bus 82801DB/DBM (ICH4/ICH4-M) USB2 EHC
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/0 eth0 network BCM4401-B0 100Base-TX
/0/100/1e/2 bridge PCIxx21/x515 Cardbus Controller
/0/100/1e/2.2 bus OHCI Compliant IEEE 1394 Host Cont
/0/100/1e/2.3 storage PCIxx21 Integrated FlashMedia Cont
/0/100/1e/2.4 generic PCI6411/6421/6611/6621/7411/7421/7
/0/100/1e/4 network BCM4318 [AirForce One 54g] 802.11g
/0/100/1f bridge 82801DBM (ICH4-M) LPC Interface Br
/0/100/1f.1 scsi0 storage 82801DBM (ICH4-M) IDE Controller
/0/100/1f.1/0 /dev/sda disk 40GB HITACHI_DK23EB-4
/0/100/1f.1/0/1 /dev/sda1 volume 36GiB EXT4 volume
/0/100/1f.1/0/2 /dev/sda2 volume 501MiB Extended partition
/0/100/1f.1/0/2/5 /dev/sda5 volume 501MiB Linux swap / Solaris partit
/0/100/1f.1/1 /dev/cdrom disk CDRW/DVD SCB5265
/0/100/1f.3 bus 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1f.5 multimedia 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
/0/100/1f.6 communication 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-
Linux william-6020GZ 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] APIC: switched to apic NOOP
[ 0.008504] SMP alternatives: switching to UP code
[ 0.044490] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.051856] ACPI: No dock devices found.
[ 0.051859] HEST: Table not found.
[ 0.059911] usbcore: registered new interface driver usbfs
[ 0.059930] usbcore: registered new interface driver hub
[ 0.059977] usbcore: registered new device driver usb
[ 0.060507] Switching to clocksource pit
[ 0.074004] pnp: PnP ACPI: found 7 devices
[ 0.111099] Switching to clocksource acpi_pm
[ 0.111501] Switched to NOHz mode on CPU #0
[ 0.210591] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.210625] ACPI: Lid Switch [LID0]
[ 0.215974] ERST: Table is not found!
[ 0.312374] hub 1-0:1.0: USB hub found
[ 0.312944] hub 2-0:1.0: USB hub found
[ 0.313471] hub 3-0:1.0: USB hub found
[ 0.707612] isapnp: No Plug & Play device found
[ 1.016128] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 1.073087] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.330938] b43-pci-bridge 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 1.360311] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1.360322] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1.360330] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1.360337] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1.400128] ssb: Sonics Silicon Backplane found on PCI device 0000:02:04.0
[ 1.420093] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.420102] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.420109] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.460209] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.460238] sdhci-pci 0000:02:02.4: SDHCI controller found [104c:8034] (rev 0)
[ 1.460304] mmc0: no vmmc regulator found
[ 1.460504] mmc1: no vmmc regulator found
[ 1.460655] mmc2: no vmmc regulator found
[ 1.481015] b44 ssb1:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:e0:b8:91:d2:bf
[ 1.505900] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 1.506259] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.0-1/input0
[ 1.506527] usbcore: registered new interface driver usbhid
[ 1.506531] usbhid: USB HID core driver
[ 21.395657] lp: driver loaded but no devices found
[ 21.573470] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 22.405009] yenta_cardbus 0000:02:02.0: CardBus bridge found [107b:0460]
[ 22.997031] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.561486] Console: switching to colour frame buffer device 160x50
[ 25.816181] b44 ssb1:0: eth0: Link is up at 100 Mbps, full duplex
[ 25.816187] b44 ssb1:0: eth0: Flow control is off for TX and off for RX
[ 25.816291] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.856037] eth0: no IPv6 routers present
 Release Date: 02/24/2005
  Serial services are supported (int 14h)
 Manufacturer: Gateway
 Product Name: 6020GZ
 Serial Number: T365651027770
 Manufacturer: Gateway
 Product Name:
 Serial Number: T365651027770
 Manufacturer: Gateway
 Serial Number: T365651027770
 Manufacturer: Intel
 Serial Number: Not Specified
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Manufacturer: Not Specified
 Serial Number: Not Specified
lo no wireless extensions.

eth0 no wireless extensions.

install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
# Warning: This file is autogenerated by bcmwl. All changes to this file will be lost.
blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist brcm80211
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
alias pci:v000014E4d00004301sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004301sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004301sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004303sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004303sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004303sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004307sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004307sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004307sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004318sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004318sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004318sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004319sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004319sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004319sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004320sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004320sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004320sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004321sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004321sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004321sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004324sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004324sv*sd*bc*sc*i* ndiswrapper
alias pci:v000014E4d00004324sv*sd*bc*sc*i* ndiswrapper

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
> hal.1: read hal dataprocess 3715: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCI 200.0: 0200 Ethernet controller
  [Created at pci.318]
  Unique ID: rBUF.19mFcCHJInA
  Parent ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Broadcom BCM4401-B0 100Base-TX"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x170c "BCM4401-B0 100Base-TX"
  SubVendor: pci 0x107b "Gateway 2000"
  SubDevice: pci 0x0360
  Revision: 0x02
  Driver: "b44"
  Driver Modules: "ssb", "b44"
  Device File: eth0
  Memory Range: 0xe0204000-0xe0205fff (rw,non-prefetchable)
  IRQ: 11 (96691 events)
  HW Address: 00:e0:b8:91:d2:bf
  Link detected: yes
  Module Alias: "pci:v000014E4d0000170Csv0000107Bsd00000360bc02sc00i00"
  Driver Info #0:
    Driver Status: b44 is active
    Driver Activation Cmd: "modprobe b44"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)

27: PCI 204.0: 0280 Network controller
  [Created at pci.318]
  Unique ID: UVH2.OUki7zOW66D
  Parent ID: 6NW+.1yBhv2xnpj4
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
  SysFS BusID: 0000:02:04.0
  Hardware Class: network
  Model: "Broadcom Gateway 7510GX"
  Vendor: pci 0x14e4 "Broadcom"
  Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
  SubVendor: pci 0x14e4 "Broadcom"
  SubDevice: pci 0x0449 "Gateway 7510GX"
  Revision: 0x02
  Driver: "b43-pci-bridge"
  Driver Modules: "ssb"
  Memory Range: 0xe0208000-0xe0209fff (rw,non-prefetchable)
  IRQ: 11 (96691 events)
  Module Alias: "pci:v000014E4d00004318sv000014E4sd00000449bc02sc80i00"
  Driver Info #0:
    Driver Status: ssb is active
    Driver Activation Cmd: "modprobe ssb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
root 512 0.0 0.4 26692 2024 ? Ssl 10:22 0:00 NetworkManager
root 971 0.0 0.0 2736 316 ? S 10:22 0:00 /sbin/dhclient -d -4 -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhclient-eth0.pid -lf /var/lib/dhcp/dhclient-2a6abd20-f37b-44b9-a846-df4e01004cac-eth0.lease -cf /var/run/nm-dhclient-eth0.conf eth0
william 3727 0.0 0.1 4188 780 pts/0 S+ 11:24 0:00 egrep --color=auto icd|etwork
Module Size Used by
parport_pc 32114 0
ppdev 12849 0
joydev 17393 0
bnep 17923 2
rfcomm 38408 0
bluetooth 148839 10 bnep,rfcomm
snd_intel8x0 33318 2
snd_ac97_codec 106082 1 snd_intel8x0
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80468 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 13132 0
snd_rawmidi 25241 1 snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event
pcmcia 39822 0
i915 505108 2
snd_timer 28932 2 snd_pcm,snd_seq
snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq
tifm_7xx1 12937 0
snd 55902 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 73673 0
tifm_core 15040 1 tifm_7xx1
yenta_socket 27428 0
pcmcia_rsrc 18367 1 yenta_socket
serio_raw 12990 0
soundcore 12600 1 snd
snd_page_alloc 14115 2 snd_intel8x0,snd_pcm
pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc
drm_kms_helper 32889 1 i915
drm 192226 3 i915,drm_kms_helper
shpchp 32356 0
binfmt_misc 17292 1
i2c_algo_bit 13199 1 i915
video 18908 1 i915
lp 17455 0
parport 40930 3 parport_pc,ppdev,lp
usbhid 41905 0
hid 77367 1 usbhid
b44 31443 0
firewire_ohci 35854 0
sdhci_pci 13658 0
ssb 50682 1 b44
sdhci 27360 1 sdhci_pci
firewire_core 56937 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
I am using a Gateway laptop 6020gz with 11.10 installed on hard drive, I hope this is correct info for you... Thanx

Revision history for this message
Best Mark Rijckenberg (markrijckenberg) said :
#3

Hi,

Please proceed with the following commands:

sudo apt-get update
sudo apt-get remove --purge bcmwl-kernel-source
sudo apt-get install b43-fwcutter firmware-b43-installer

b43-fwcutter and firmware-b43-installer exist in the Ubuntu repositories, but you will need a working wired Internet connection in Ubuntu in order to locate it and install it.

The only way to do that - in your case - is to connect the pc to the wireless router using a LAN cable, instead of using wireless.

Then REBOOT and retest wireless.

Regards,

Mark

Revision history for this message
William Gamache (bgama12001) said :
#4

Worked Great !!! Once again you guys are Awesome !!!

Revision history for this message
William Gamache (bgama12001) said :
#5

Thanks Mark Rijckenberg, that solved my question.

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#6

You're welcome.