accessing windows drives from ubuntu

i have got dual boot system having xp and ubuntu...
i have 2 drives in xp C and E..
when i start ubuntu i can access C drive in it..which is system drive..
but i cant access E drive from ubuntu...
drive E is fat32..
i have all my data on E drive...
how to access drive E from ubuntu..
plz help me..
regards...
rahul..
ya thts right i cant see drive E in places..
no where in ubuntu...

1) FOR cat /etc/fsta
IM GETTING FOLLOWING

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2
UUID=e968c65e-1515-43ca-ac5e-f654c2e7ca42 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda5
UUID=2C2D-A4A7 /windows vfat defaults,umask=007,gid=46 0 1
# /dev/sda3
UUID=506400a3-38b3-4233-9f4c-d97667ddd834 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

2) FOR dmesg
IM GETTING

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-18-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bdf0000 (usable)
[ 0.000000] BIOS-e820: 000000001bdf0000 - 000000001bdfa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bdfa000 - 000000001be00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001be00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 445MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f8180
[ 0.000000] Entering add_active_range(0, 0, 114160) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114160
[ 0.000000] HighMem 114160 -> 114160
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114160
[ 0.000000] On node 0 totalpages: 114160
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 859 pages used for memmap
[ 0.000000] Normal zone: 109205 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8150 checksum 0
[ 0.000000] ACPI: RSDP 000F8150, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 1BDF607F, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 1BDF9F46, 0074 (r1 SiS 661MX 6040000 PTL 1)
[ 0.000000] ACPI: DSDT 1BDF6705, 3841 (r1 PTLTD 661MX 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1BDFAFC0, 0040
[ 0.000000] ACPI: APIC 1BDF9FBA, 0046 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 1BDF62AE, 0289 (r1 PmRef Cpu0Ist 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 1BDF60B3, 01FB (r1 PmRef CpuPm 3000 INTL 20030224)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113269
[ 0.000000] Kernel command line: root=UUID=e968c65e-1515-43ca-ac5e-f654c2e7ca42 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1500.096 MHz processor.
[ 15.760678] Console: colour VGA+ 80x25
[ 15.760684] console [tty0] enabled
[ 15.761084] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.761458] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.773476] Memory: 440708k/456640k available (2176k kernel code, 15408k reserved, 1006k data, 368k init, 0k highmem)
[ 15.773485] virtual kernel memory layout:
[ 15.773487] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.773488] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.773490] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 15.773491] lowmem : 0xc0000000 - 0xdbdf0000 ( 445 MB)
[ 15.773493] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 15.773494] .data : 0xc03201f4 - 0xc041bdc4 (1006 kB)
[ 15.773495] .text : 0xc0100000 - 0xc03201f4 (2176 kB)
[ 15.773500] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.773550] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 15.853502] Calibrating delay using timer specific routine.. 3002.10 BogoMIPS (lpj=6004206)
[ 15.853535] Security Framework initialized
[ 15.853546] SELinux: Disabled at boot.
[ 15.853565] AppArmor: AppArmor initialized
[ 15.853570] Failure registering capabilities with primary security module.
[ 15.853581] Mount-cache hash table entries: 512
[ 15.853739] Initializing cgroup subsys ns
[ 15.853746] Initializing cgroup subsys cpuacct
[ 15.853759] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 15.853773] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.853775] CPU: L2 cache: 2048K
[ 15.853779] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 15.853790] Compat vDSO mapped to ffffe000.
[ 15.853806] Checking 'hlt' instruction... OK.
[ 15.869964] SMP alternatives: switching to UP code
[ 15.872199] Freeing SMP alternatives: 11k freed
[ 15.872325] Early unpacking initramfs... done
[ 16.299505] ACPI: Core revision 20070126
[ 16.299580] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.305018] CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
[ 16.305049] Total of 1 processors activated (3002.10 BogoMIPS).
[ 16.305177] ENABLING IO-APIC IRQs
[ 16.305348] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 16.449039] Brought up 1 CPUs
[ 16.449066] CPU0 attaching sched-domain:
[ 16.449069] domain 0: span 01
[ 16.449071] groups: 01
[ 16.449285] net_namespace: 64 bytes
[ 16.449295] Booting paravirtualized kernel on bare hardware
[ 16.449808] Time: 21:26:59 Date: 06/04/08
[ 16.449842] NET: Registered protocol family 16
[ 16.450060] EISA bus registered
[ 16.450082] ACPI: bus type pci registered
[ 16.454438] PCI: PCI BIOS revision 2.10 entry at 0xfd786, last bus=1
[ 16.454440] PCI: Using configuration type 1
[ 16.454443] Setting up standard PCI resources
[ 16.481585] ACPI: EC: Look up EC in DSDT
[ 16.483148] ACPI: Interpreter enabled
[ 16.483152] ACPI: (supports S0 S3 S4 S5)
[ 16.483164] ACPI: Using IOAPIC for interrupt routing
[ 16.500691] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 16.500694] ACPI: EC: driver started in poll mode
[ 16.500737] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.500926] Enabling SiS 96x SMBus.
[ 16.501666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.506729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 16.506813] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11)
[ 16.506894] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 16.506974] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11)
[ 16.507071] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 16.507152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 16.507230] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 16.507309] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 16.507425] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.507457] pnp: PnP ACPI init
[ 16.507464] ACPI: bus type pnp registered
[ 16.508754] pnp: PnP ACPI: found 9 devices
[ 16.508757] ACPI: ACPI bus type pnp unregistered
[ 16.508760] PnPBIOS: Disabled by ACPI PNP
[ 16.508993] PCI: Using ACPI for IRQ routing
[ 16.508996] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.516961] NET: Registered protocol family 8
[ 16.516963] NET: Registered protocol family 20
[ 16.517029] AppArmor: AppArmor Filesystem Enabled
[ 16.520924] Time: tsc clocksource has been installed.
[ 16.528956] system 00:04: ioport range 0x8000-0x807f has been reserved
[ 16.528960] system 00:04: ioport range 0x8080-0x80ff has been reserved
[ 16.528963] system 00:04: ioport range 0x8100-0x811f has been reserved
[ 16.528966] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 16.528970] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 16.528973] system 00:04: ioport range 0x3f0-0x3f1 has been reserved
[ 16.528977] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 16.528981] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 16.528984] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 16.528987] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 16.528991] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 16.528994] system 00:04: iomem range 0xd0000-0xd7fff has been reserved
[ 16.528997] system 00:04: iomem range 0x0-0x0 could not be reserved
[ 16.559411] PCI: Bridge: 0000:00:01.0
[ 16.559415] IO window: 9000-9fff
[ 16.559421] MEM window: e2100000-e21fffff
[ 16.559425] PREFETCH window: e8000000-efffffff
[ 16.559432] PCI: Bus 2, cardbus bridge: 0000:00:06.0
[ 16.559434] IO window: 00002400-000024ff
[ 16.559439] IO window: 00002800-000028ff
[ 16.559444] PREFETCH window: 30000000-33ffffff
[ 16.559448] MEM window: 34000000-37ffffff
[ 16.559470] PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
[ 16.559476] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 16.559492] NET: Registered protocol family 2
[ 16.596922] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 16.597136] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.597244] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 16.597353] TCP: Hash tables configured (established 16384 bind 16384)
[ 16.597356] TCP reno registered
[ 16.608974] checking if image is initramfs... it is
[ 17.060455] Switched to high resolution mode on CPU 0
[ 17.436730] Freeing initrd memory: 7281k freed
[ 17.437494] audit: initializing netlink socket (disabled)
[ 17.437516] audit(1212614820.560:1): initialized
[ 17.439928] VFS: Disk quotas dquot_6.5.1
[ 17.440048] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.440229] io scheduler noop registered
[ 17.440233] io scheduler anticipatory registered
[ 17.440235] io scheduler deadline registered
[ 17.440248] io scheduler cfq registered (default)
[ 17.879615] Boot video device is 0000:01:00.0
[ 17.879912] isapnp: Scanning for PnP cards...
[ 18.233225] isapnp: No Plug & Play device found
[ 18.263817] Real Time Clock Driver v1.12ac
[ 18.263941] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.264611] PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
[ 18.264625] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[ 18.264634] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 18.265349] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.265430] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.265540] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.269144] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.269150] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.271390] mice: PS/2 mouse device common for all mice
[ 18.271516] EISA: Probing bus 0 at eisa.0
[ 18.271524] Cannot allocate resource for EISA slot 1
[ 18.271526] Cannot allocate resource for EISA slot 2
[ 18.271547] Cannot allocate resource for EISA slot 8
[ 18.271549] EISA: Detected 0 cards.
[ 18.271554] cpuidle: using governor ladder
[ 18.271556] cpuidle: using governor menu
[ 18.271670] NET: Registered protocol family 1
[ 18.271702] Using IPI No-Shortcut mode
[ 18.271746] registered taskstats version 1
[ 18.271846] Magic number: 12:900:448
[ 18.271960] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.271962] EDD information not available.
[ 18.272302] Freeing unused kernel memory: 368k freed
[ 18.311191] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 19.506525] fuse init (API version 7.9)
[ 19.528305] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 19.528312] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 19.528327] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 19.531805] ACPI: Thermal Zone [THRM] (52 C)
[ 19.532828] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 20.191559] SCSI subsystem initialized
[ 20.289279] libata version 3.00 loaded.
[ 20.297372] usbcore: registered new interface driver usbfs
[ 20.297401] usbcore: registered new interface driver hub
[ 20.313616] usbcore: registered new device driver usb
[ 20.329240] sis900.c: v1.08.10 Apr. 2 2006
[ 20.329309] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 20.334450] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 20.340614] 0000:00:04.0: Using transceiver found at address 13 as default
[ 20.343318] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 16, 00:c0:9f:90:0d:92
[ 20.352167] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 20.352226] ACPI: PCI interrupt for device 0000:00:02.5 disabled
[ 20.373229] pata_sis 0000:00:02.5: version 0.5.2
[ 20.373258] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 20.385590] scsi0 : pata_sis
[ 20.389151] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 20.392142] scsi1 : pata_sis
[ 20.392328] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
[ 20.392331] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
[ 20.777166] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD4A, max UDMA/100
[ 20.777172] ata1.00: 117210240 sectors, multi 16: LBA48
[ 20.793429] ata1.00: configured for UDMA/100
[ 21.052527] Clocksource tsc unstable (delta = -1691164622 ns)
[ 21.056616] Time: acpi_pm clocksource has been installed.
[ 21.067197] ata2.00: ATAPI: PIONEER DVD-RW DVR-K15RA, 1.04, max UDMA/33
[ 21.118300] ata2.00: configured for UDMA/33
[ 21.118458] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5
[ 21.126586] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K15RA 1.04 PQ: 0 ANSI: 5
[ 21.126785] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 21.126802] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 21.127285] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 21.127307] ohci_hcd 0000:00:03.0: irq 19, io mem 0xe2000000
[ 21.139016] Driver 'sd' needs updating - please use bus_type methods
[ 21.139119] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 21.139133] sd 0:0:0:0: [sda] Write Protect is off
[ 21.139136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.139154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.139212] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 21.139223] sd 0:0:0:0: [sda] Write Protect is off
[ 21.139226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.139243] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.139247] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 21.187694] usb usb1: configuration #1 chosen from 1 choice
[ 21.187724] hub 1-0:1.0: USB hub found
[ 21.187734] hub 1-0:1.0: 3 ports detected
[ 21.289580] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 21.289596] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 21.289621] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 21.289638] ohci_hcd 0000:00:03.1: irq 20, io mem 0xe2001000
[ 21.351511] usb usb2: configuration #1 chosen from 1 choice
[ 21.351536] hub 2-0:1.0: USB hub found
[ 21.351543] hub 2-0:1.0: 3 ports detected
[ 21.453619] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 21.453628] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 21.453657] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[ 21.453702] ehci_hcd 0000:00:03.3: irq 21, io mem 0xe2002000
[ 21.465337] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.465452] usb usb3: configuration #1 chosen from 1 choice
[ 21.465481] hub 3-0:1.0: USB hub found
[ 21.465495] hub 3-0:1.0: 6 ports detected
[ 22.579324] sda1 sda2 sda3 sda4 < sda5 >
[ 22.615234] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.622089] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.622112] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.646850] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 22.646856] Uniform CD-ROM driver Revision: 3.20
[ 22.646914] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.914567] Attempting manual resume
[ 22.914571] swsusp: Resume From Partition 8:3
[ 22.914573] PM: Checking swsusp image.
[ 22.914721] PM: Resume from disk failed.
[ 22.931106] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 22.931110] EXT3-fs: write access will be enabled during recovery.
[ 25.614871] kjournald starting. Commit interval 5 seconds
[ 25.614894] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 25.614901] ext3_orphan_cleanup: deleting unreferenced inode 241932
[ 25.614928] EXT3-fs: sda2: 1 orphan inode deleted
[ 25.614930] EXT3-fs: recovery complete.
[ 25.630256] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.252759] Linux agpgart interface v0.102
[ 37.336115] agpgart: Detected SiS chipset - id:1633
[ 37.339363] agpgart: AGP aperture is 32M @ 0xe0000000
[ 37.399808] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 37.447755] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 37.603605] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 37.696470] ath_hal: module license 'Proprietary' taints kernel.
[ 37.764696] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 37.979561] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0082]
[ 37.979584] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 37.979586] Yenta: Routing CardBus interrupts to PCI
[ 37.979592] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 38.211649] Yenta: ISA IRQ mask 0x06f8, PCI irq 16
[ 38.211654] Socket status: 30000006
[ 38.229085] wlan: 0.9.4
[ 38.315198] ath_pci: 0.9.4
[ 38.316268] PCI: Enabling device 0000:00:0b.0 (0010 -> 0012)
[ 38.316281] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 38.317857] wifi%d: unable to attach hardware: 'Hardware revision not supported' (HAL status 13)
[ 38.317877] ACPI: PCI interrupt for device 0000:00:0b.0 disabled
[ 38.419089] input: Power Button (FF) as /devices/virtual/input/input2
[ 38.434651] ACPI: Power Button (FF) [PWRF]
[ 38.434755] input: Lid Switch as /devices/virtual/input/input3
[ 38.436550] ACPI: Lid Switch [LID]
[ 38.436607] input: Power Button (CM) as /devices/virtual/input/input4
[ 38.450628] ACPI: Power Button (CM) [PWRB]
[ 38.450691] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 38.466626] ACPI: Sleep Button (CM) [SLPB]
[ 38.467550] ACPI: AC Adapter [ACAD] (on-line)
[ 38.564512] ACPI: Battery Slot [BAT1] (battery present)
[ 38.654570] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 39.324426] ACPI: WMI-Acer: Mapper loaded
[ 39.461659] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 39.461678] acer_acpi: No or unsupported WMI interface, unable to load.
[ 40.955633] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[ 41.494282] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[ 41.532866] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 41.779308] intel8x0_measure_ac97_clock: measured 55432 usecs
[ 41.779313] intel8x0: clocking to 48000
[ 41.854669] cs: IO port probe 0x100-0x3af: clean.
[ 41.856387] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 41.857077] cs: IO port probe 0x820-0x8ff: clean.
[ 41.857675] cs: IO port probe 0xc00-0xcf7: clean.
[ 41.858438] cs: IO port probe 0xa00-0xaff: clean.
[ 42.198564] lp: driver loaded but no devices found
[ 42.407133] Adding 498004k swap on /dev/sda3. Priority:-1 extents:1 across:498004k
[ 43.175958] EXT3 FS on sda2, internal journal
[ 47.135054] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.507288] No dock devices found.
[ 48.684573] apm: BIOS not found.
[ 48.836739] ppdev: user-space parallel port driver
[ 49.057937] audit(1212595084.289:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4820 profile="/usr/sbin/cupsd" namespace="default"
[ 92.378836] Marking TSC unstable due to: cpufreq changes.
[ 49.966534] Bluetooth: Core ver 2.11
[ 49.967240] NET: Registered protocol family 31
[ 49.967243] Bluetooth: HCI device and connection manager initialized
[ 49.967248] Bluetooth: HCI socket layer initialized
[ 62.544016] Bluetooth: L2CAP ver 2.9
[ 62.544022] Bluetooth: L2CAP socket layer initialized
[ 50.075365] Bluetooth: RFCOMM socket layer initialized
[ 50.075618] Bluetooth: RFCOMM TTY layer initialized
[ 50.075621] Bluetooth: RFCOMM ver 1.8
[ 127.716064] eth0: Media Link On 100mbps full-duplex
[ 52.260287] NET: Registered protocol family 17
[ 142.172180] NET: Registered protocol family 10
[ 142.173115] lo: Disabled Privacy Extensions
[ 154.518556] eth0: no IPv6 routers present