webcam

https://help.ubuntu.com/community/EasyCam
https://help.ubuntu.com/community/Webcam

here are few useful links that would be useful to you..

nothing :(

For the 05a9:4519 OmniVision Technologies, Inc.
Please take a look at this page: http://forum.skype.com/index.php?s=c39e1ec972db9aec5915ac3e545f6d57&showtopic=100897&st=100

Hope this helps

nothing ,i've serach with camorama and there's a mess couldn't connect to video device (/dev/video0).Please check connection.
The connection is ok but nothing :(((((((,do i have another choice or i have to say good bye to my cams in ubuntu ? :(

why is so hard to check something for the installation of my cams?Are mthe last 2 peripherical that i have to install and my ubuntu is complete

terminal<>

lsshal

or l

smod

or

lspci

peace

terminal<>

lshal

or l

smod

or

lspci

peace ps one s in lshal sorry this should let you see what you need to do

if this doesnt work let someone know

smod

fation@fation-desktop:~$ lsmod
Module Size Used by
af_packet 24840 4
arc4 2944 2
ecb 4608 2
blkcipher 7556 1 ecb
rc80211_simple 6912 1
rt73usb 25344 0
rt2x00usb 12032 1 rt73usb
rt2x00lib 19584 2 rt73usb,rt2x00usb
rfkill 8208 1 rt2x00lib
mac80211 171016 3 rc80211_simple,rt2x00usb,rt2x00lib
cfg80211 7304 1 mac80211
input_polldev 5896 1 rt2x00lib
crc_itu_t 3072 1 rt2x00lib
ipv6 273892 10
radeon 125472 2
drm 83348 3 radeon
hci_usb 18332 2
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 7 hci_usb,rfcomm,l2cap
ppdev 10244 0
cpufreq_stats 7232 0
cpufreq_conservative 8072 0
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 2688 0
button 8976 0
sbs 19592 0
video 18060 0
ac 6148 0
container 5504 0
dock 10656 0
battery 11012 0
lp 12580 0
snd_ens1371 27680 2
gameport 16776 1 snd_ens1371
snd_ac97_codec 100644 1 snd_ens1371
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 2 snd_ens1371,snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
parport_pc 37412 1
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 4224 0
snd 54660 14 snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
snd_page_alloc 11400 1 snd_pcm
parport 37448 3 ppdev,lp,parport_pc
serio_raw 8068 0
psmouse 39952 0
i2c_viapro 10004 0
shpchp 34580 0
pci_hotplug 32704 1 shpchp
i2c_core 26112 1 i2c_viapro
via_agp 11264 1
agpgart 35016 2 drm,via_agp
evdev 11136 4
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
ide_disk 18560 6
ide_cd 32672 0
cdrom 37536 1 ide_cd
via82cxxx 10372 0 [permanent]
ide_core 116804 3 ide_disk,ide_cd,via82cxxx
ata_generic 8452 0
sata_via 12548 0
uhci_hcd 26640 0
ehci_hcd 36492 0
floppy 60004 0
usbcore 138632 6 rt73usb,rt2x00usb,hci_usb,uhci_hcd,ehci_hcd
libata 125168 2 ata_generic,sata_via
scsi_mod 147084 1 libata
e1000 126272 0
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 5
apparmor 40728 0
commoncap 8320 1 apparmor
fation@fation-desktop:~$

lspci

fation@fation-desktop:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller
00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller
00:0a.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01)
00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:0d.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
02:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]

sooo...both the cams are connected but it seems that are not here,perhaps i don't see them ,i don't know :(((

try this program in the terminal type

sudo apt-get install xawtv

this should give you resolution instantly upon installation no drivers needed

hope that helps peace=]

i have installed xawtv but it won't open i don't know why , i reinstalled it but nothing it win't open

*** won't open sorry

sorry your still having trouble

first of all im assuming the cameras are ported to your usb

are other devices working there

did you load other hardware onto your system after you installed ubuntu

youll have to reload for recognization

it looks to me like your usb inerface is there

lets see if the computer is talking to it

try this command

in the terminal

lshal

udi = '/org/freedesktop/Hal/devices/pci_1274_1371'
  info.bus = 'pci' (string)
  info.linux.driver = 'ENS1371' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'ES1371 [AudioPCI-97]' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.vendor = 'Ensoniq' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
  pci.device_class = 4 (0x4) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 1 (0x1) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
  pci.product = 'ES1371 [AudioPCI-97]' (string)
  pci.product_id = 4977 (0x1371) (int)
  pci.subsys_product = 'Creative Sound Blaster AudioPCI64V, AudioPCI128' (string)
  pci.subsys_product_id = 4977 (0x1371) (int)
  pci.subsys_vendor = 'Ensoniq' (string)
  pci.subsys_vendor_id = 4724 (0x1274) (int)
  pci.vendor = 'Ensoniq' (string)
  pci.vendor_id = 4724 (0x1274) (int)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_playback_1'
  alsa.card = 0 (0x0) (int)
  alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  alsa.device = 1 (0x1) (int)
  alsa.device_file = '/dev/snd/pcmC0D1p' (string)
  alsa.device_id = 'ES1371 DAC1' (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.type = 'playback' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC1 ALSA Playback Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_playback_1' (string)
  linux.device_file = '/dev/snd/pcmC0D1p' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D1p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_playback_0'
  alsa.card = 0 (0x0) (int)
  alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  alsa.device = 0 (0x0) (int)
  alsa.device_file = '/dev/snd/pcmC0D0p' (string)
  alsa.device_id = 'ES1371 DAC2/ADC' (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.type = 'playback' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC ALSA Playback Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_playback_0' (string)
  linux.device_file = '/dev/snd/pcmC0D0p' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_capture_0'
  alsa.card = 0 (0x0) (int)
  alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  alsa.device = 0 (0x0) (int)
  alsa.device_file = '/dev/snd/pcmC0D0c' (string)
  alsa.device_id = 'ES1371 DAC2/ADC' (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.type = 'capture' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC ALSA Capture Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_capture_0' (string)
  linux.device_file = '/dev/snd/pcmC0D0c' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_mixer__1'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC OSS Control Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_mixer__1' (string)
  linux.device_file = '/dev/mixer' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/mixer' (string)
  oss.card = 0 (0x0) (int)
  oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  oss.device_file = '/dev/mixer' (string)
  oss.device_id = 'ES1371 DAC2/ADC' (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.type = 'mixer' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_midi_0'
  alsa.card = 0 (0x0) (int)
  alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  alsa.device = 0 (0x0) (int)
  alsa.device_file = '/dev/snd/midiC0D0' (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.type = 'midi' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'Ensoniq AudioPCI ENS1371 ALSA MIDI Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_midi_0' (string)
  linux.device_file = '/dev/snd/midiC0D0' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/midiC0D0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_midi_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC OSS MIDI Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_midi_0' (string)
  linux.device_file = '/dev/midi' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/midi' (string)
  oss.card = 0 (0x0) (int)
  oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  oss.device = 0 (0x0) (int)
  oss.device_file = '/dev/midi' (string)
  oss.device_id = 'ES1371 DAC2/ADC' (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.type = 'midi' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_0_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_0_0' (string)
  linux.device_file = '/dev/dsp' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/dsp' (string)
  oss.card = 0 (0x0) (int)
  oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  oss.device = 0 (0x0) (int)
  oss.device_file = '/dev/dsp' (string)
  oss.device_id = 'ES1371 DAC2/ADC' (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_control__1'
  alsa.card = 0 (0x0) (int)
  alsa.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  alsa.device_file = '/dev/snd/controlC0' (string)
  alsa.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  alsa.type = 'control' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'Ensoniq AudioPCI ENS1371 ALSA Control Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_alsa_control__1' (string)
  linux.device_file = '/dev/snd/controlC0' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/controlC0' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_0' (string)
  linux.device_file = '/dev/audio' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/audio' (string)
  oss.card = 0 (0x0) (int)
  oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  oss.device = 0 (0x0) (int)
  oss.device_file = '/dev/audio' (string)
  oss.device_id = 'ES1371 DAC2/ADC' (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_1'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  info.product = 'ES1371 DAC2/ADC OSS PCM Device' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1274_1371_oss_pcm_1' (string)
  linux.device_file = '/dev/adsp' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'sound' (string)
  linux.sysfs_path = '/sys/class/sound/adsp' (string)
  oss.card = 0 (0x0) (int)
  oss.card_id = 'Ensoniq AudioPCI ENS1371' (string)
  oss.device = 1 (0x1) (int)
  oss.device_file = '/dev/adsp' (string)
  oss.device_id = 'ES1371 DAC2/ADC' (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_1274_1371' (string)
  oss.type = 'pcm' (string)

udi = '/org/freedesktop/Hal/devices/pci_14f1_2f30'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'HSF 56k Data/Fax Modem' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_14f1_2f30' (string)
  info.vendor = 'Conexant' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
  pci.device_class = 7 (0x7) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 128 (0x80) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
  pci.product = 'HSF 56k Data/Fax Modem' (string)
  pci.product_id = 12080 (0x2f30) (int)
  pci.subsys_product_id = 8285 (0x205d) (int)
  pci.subsys_vendor = 'Conexant' (string)
  pci.subsys_vendor_id = 5361 (0x14f1) (int)
  pci.vendor = 'Conexant' (string)
  pci.vendor_id = 5361 (0x14f1) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_a208'
  info.bus = 'pci' (string)
  info.linux.driver = 'pcieport-driver' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT890 PCI to PCI Bridge Controller' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_a208' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 4 (0x4) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
  pci.product = 'PT890 PCI to PCI Bridge Controller' (string)
  pci.product_id = 41480 (0xa208) (int)
  pci.subsys_product_id = 0 (0x0) (int)
  pci.subsys_vendor_id = 0 (0x0) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_5b70'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_a208' (string)
  info.product = 'RV370 [Radeon X300SE]' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5b70' (string)
  info.vendor = 'ATI Technologies Inc' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.1' (string)
  pci.device_class = 3 (0x3) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 128 (0x80) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.1' (string)
  pci.product = 'RV370 [Radeon X300SE]' (string)
  pci.product_id = 23408 (0x5b70) (int)
  pci.subsys_product_id = 1281 (0x501) (int)
  pci.subsys_vendor = 'PC Partner Limited' (string)
  pci.subsys_vendor_id = 5963 (0x174b) (int)
  pci.vendor = 'ATI Technologies Inc' (string)
  pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1002_5b60'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1106_a208' (string)
  info.product = 'RV370 5B60 [Radeon X300 (PCIE)]' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5b60' (string)
  info.vendor = 'ATI Technologies Inc' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0' (string)
  pci.device_class = 3 (0x3) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:00.0' (string)
  pci.product = 'RV370 5B60 [Radeon X300 (PCIE)]' (string)
  pci.product_id = 23392 (0x5b60) (int)
  pci.subsys_product_id = 1280 (0x500) (int)
  pci.subsys_vendor = 'PC Partner Limited' (string)
  pci.subsys_vendor_id = 5963 (0x174b) (int)
  pci.vendor = 'ATI Technologies Inc' (string)
  pci.vendor_id = 4098 (0x1002) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_b198'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'VT8237 PCI Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_b198' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 4 (0x4) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
  pci.product = 'VT8237 PCI Bridge' (string)
  pci.product_id = 45464 (0xb198) (int)
  pci.subsys_product_id = 0 (0x0) (int)
  pci.subsys_vendor_id = 0 (0x0) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_7308'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_7308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.7' (string)
  pci.product = 'PT894 Host Bridge' (string)
  pci.product_id = 29448 (0x7308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_5308'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 I/O APIC Interrupt Controller' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_5308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string)
  pci.device_class = 8 (0x8) (int)
  pci.device_protocol = 32 (0x20) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.5' (string)
  pci.product = 'PT894 I/O APIC Interrupt Controller' (string)
  pci.product_id = 21256 (0x5308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_4308'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_4308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.4' (string)
  pci.product = 'PT894 Host Bridge' (string)
  pci.product_id = 17160 (0x4308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_3208'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT890 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3208' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3' (string)
  pci.product = 'PT890 Host Bridge' (string)
  pci.product_id = 12808 (0x3208) (int)
  pci.subsys_product_id = 0 (0x0) (int)
  pci.subsys_vendor_id = 0 (0x0) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_2308'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_2308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2' (string)
  pci.product = 'PT894 Host Bridge' (string)
  pci.product_id = 8968 (0x2308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_1308'
  info.bus = 'pci' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_1308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1' (string)
  pci.product = 'PT894 Host Bridge' (string)
  pci.product_id = 4872 (0x1308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

udi = '/org/freedesktop/Hal/devices/pci_1106_308'
  info.bus = 'pci' (string)
  info.linux.driver = 'agpgart-via' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.product = 'PT894 Host Bridge' (string)
  info.subsystem = 'pci' (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1106_308' (string)
  info.vendor = 'VIA Technologies, Inc.' (string)
  linux.hotplug_type = 2 (0x2) (int)
  linux.subsystem = 'pci' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
  pci.device_class = 6 (0x6) (int)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
  pci.product = 'PT894 Host Bridge' (string)
  pci.product_id = 776 (0x308) (int)
  pci.subsys_product_id = 33177 (0x8199) (int)
  pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
  pci.subsys_vendor_id = 4163 (0x1043) (int)
  pci.vendor = 'VIA Technologies, Inc.' (string)
  pci.vendor_id = 4358 (0x1106) (int)

Dumped 111 device(s) from the Global Device List.
------------------------------------------------

fation@fation-desktop:~$

your pci slot is one of these your usb port ?

did you add the usb port to your computer

im not sure how to tell you to proceed im really a noob in this

all i can say is your initial output shows the camera so im not sure exactly whats going wrong

the reason i ask about your usb port is if i run the command in my terminal it will show my usb connections talking to the

rest of the computer such as your oss sound or alsa in hal or your "hard drive"

if youve added the hardware since you installed ubuntu you may have to reboot for it toreally read it sorry i dont know more to help

peace=]

ok so,

fation@fation-desktop:~$ lsusb
Bus 005 Device 010: ID 0c45:624e Microdia
Bus 005 Device 008: ID 07d1:3c03 D-Link System
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0a5c:200a Broadcom Corp.
Bus 003 Device 001: ID 0000:0000
fation@fation-desktop:~$

my webcam is a microdia how i see, i search for the microdia drivers

git clone http://repo.or.cz/r/microdia.git
cd microdia
make

now doing this:
root@fation-desktop:~# insmod ./mocrodia.ko
insmod: can't read './mocrodia.ko': No such file or directory
root@fation-desktop:~#

the last step because at the website they tell that this is the last step after i have to di the "dmesg" and read and the job is done, but is this root@fation-desktop:~# insmod ./mocrodia.ko
insmod: can't read './mocrodia.ko': No such file or directory
root@fation-desktop:~#
 the last problem

:(

the /microdia.ko already exists in the dir /microdia
but it's not ./microdia.ko is just microdia.ko

please try to type:

insmod microdia.ko

root@fation-desktop:~# insmod ./microdia.ko
insmod: can't read './microdia.ko': No such file or directory
root@fation-desktop:~# insmod microdia.ko
insmod: can't read 'microdia.ko': No such file or directory
root@fation-desktop:~#

the same as with the "mocrodia" sorry for the big lapsus.

to became root
 i type su :
fation@fation-desktop:~$ su
Password:
su: Authentication failure
Sorry.
fation@fation-desktop:~$

why? i know my pass

however i used sudo -i

if youve started in sudo it will register as such

the same applies for aptitude verses apt

once you start down this road you need to follow the trail back home

su or sudo will work but if you started your super user as anothe authourized agent thats who you are

password or not

sudo aptitude-get

or sudo apt-get

or su apt-get

or su aptitude-get

????????????????????????????????????????????????????

you will need to import the tar for the archive to be recognized

try sourceforge or similar web link for backup data

peace

=]

im not sure what your trying to do but git is a laguage for developers and im not sure how that

links to your web cam

git clone http://repo.or.cz/r/microdia.git

fation@fation-desktop:~$ lsusb once again with this command your transmission is recognized so why doesnt

your system read the files that should be created???

are you missing a package??

try you system >application>synaptic> and choose broken package in filter and check to see

if any need to be reinstalled

also go to your terminal and try

sudo apt-get updates

hope that helps peace =]

solved...i've installed my webcam HERCULES and not the trust...thanks to all the community

peace & love

best regards to all

=]

Come on, that's not actually solving the problem! ;-)

I think you probably had the solution right in front of you.

I'll give you some background info:

> git clone http://repo.or.cz/r/microdia.git
> cd microdia
> make
>
> now doing this:
> root@fation-desktop:~# insmod ./microdia.ko
> insmod: can't read './microdia.ko': No such file or directory
>
> the /microdia.ko already exists in the dir /microdia
> but it's not ./microdia.ko is just microdia.ko

1) First take a look at the prompt: root@fation-desktop:~#

It says that you are "root" on computer "fation-desktop" and your current folder is "~".
"~" is short for "your home folder", or in this case "/root/".

If you would change the directory, e.g. with:

cd /etc

the prompt would reflect this change: root@fation-desktop:/etc#

If you would be logged in as user "fation" instead of as root, the prompt would be:

fation@fation-desktop:~$

Notice: for a user other than root, the prompt ends on "$" instead of "#". This so you see you are root and pay attention to what you do (as root, you can do all sorts nasty of things, such as delete all files on the system. So you should always be careful as root).

Also notice: In this case, "~" is the home folder of user "fation", or: "/home/fation/".
(for regular users (i.e. not root), the home folders are subfolders of /home)

2) Look at the command you issue: root@fation-desktop:~# insmod ./microdia.ko

"insmod" means: "insert module",

"micordia.ko" is the module (i.e. the file) that you are insmodding,

and "./" is the path to that module (i.e. where you say that insmod should look for the file).
And "." stands for "the current directory".

So if you issue: "root@fation-desktop:~# insmod ./microdia.ko", you are actually issuing: "insmod /root/micordia.ko".

As there is no file micordia.ko in the home folder of the root, it says "insmod: can't read 'microdia.ko': No such file or directory"

So you should do:

root@fation-desktop:~# insmod micordia/microdia.ko

or:

root@fation-desktop:~# insmod /home/fation/micordia/microdia.ko

depending on where you compiled the module.

Hope this helps.

Greetings,

Johan